Introduction：

This efficient, energy and space-saving filter belt press offers the most economic way of drying sludge, in terms of both capital and running costs.
The system is made up of two parts: pre-separator and filter belt press. The sludge to be dried is pumped into the pre-separator where the poly-electrolite solution mixed with the sludge flocculates.
Some water is separated in the drum where the sludge flow discharging into the filter belt is also balanced. An even sludge load optimizes the pressing process and the capacity.
Water removal continues on the filter belt. The filter belt is controlled automatically by pneumatic adjustment of the compression force. The pressure gradually increases as the sludge advances from the free discharge zone to the compression zone. Both upper and lower filter belts have their own drive rollers which increases the operational reliability of the press.
Splashing and odour nuisance is eliminated. Because of the closed construction, the odours generated are led straight to the exhaust system. The side covers of the device can be opened if necessary, which ensures that all parts of the system can be easily dealt with when required.
Because of automatic pre and post washing of the drum, filter belt and water collector tray, there is minimal cleaning and maintenance required.

↑
thickening/dewatering
integrated filter