HEFEI TALENTGROUP-Centrifuges，Filters，Extractors，Separators and other products for solid-liquid/liquid-liquid separations

Introduction：

EYCCL Vertical Sluicing Discharge Pressure Leaf Filters are quite similar to the Horizontal Plate Filters except for the orientation of the filter elements which are vertical rather than horizontal. They are applied for the polishing slurries with very low solids content of 1-5% or for cake filtration with a solids concentration of 20-25%.

EYCCL Vertical Sluicing Discharge Leaf Filters are also very well suited for handling flammable, toxic and corrosive materials since they are autoclaved and designed for hazardous environments when high pressure and safe operation are required. Likewise, they may be readily jacketed for applications whenever hot or cold temperatures are to be preserved. These features are not possible on Filterpresses which require the opening of plates to the atmosphere and shifting them one by one to allow cake discharge at the end of each cycle.

How it work：

The slurry is pumped under pressure into a vessel that is fitted with a stack of vertical leaves that serve as filter elements. Each leaf has a centrally located neck at its bottom which is inserted into a manifold that collects the filtrate. The leaf is constructed with ribs on both sides to allow free flow of filtrate towards the neck and is covered with coarse mesh screens that support the finer woven metal screens or filter cloth that retain the cake.

↑
EYCCL sluicing discharge
pressure leaf filter

← the leaves(filter -------------------------medium)

The space between the leaves may vary from 30-100 mm depending on the cake formation properties and the ability of the air pressure to hold a thick and heavy cake to the vertical leaf surface. The space is set by the filtrate necks of the leaves at the bottom end and with spacers at the top end brackets.

For fast filtering slurries the space may be doubled by removing every second plate so consequently the cake space doubles but the filtration area is cut in half.

Technical parameters：

model	main technical parameters
model	filtration area (m2)	throughput of filter (t/h)	Max operating pressure (MPa)	vessel diameter (mm)	the leaves number
EYCCL3-N	3	2～2.5	0.6	500	11
EYCCL5-N	5	3～4	0.6	600	9
EYCCL8-N	8	5～7	0.6	800	11
EYCCL12-N	12	8～12	0.6	1000	11
EYCCL16-N	16	11～13	0.6	1000	15
EYCCL25-N	25	17～20	0.6	1200	17
EYCCL30-N	30	21～24	0.6	1200	19
EYCCL50-N	50	35～40	0.6	1400	19
EYCCL60-N	60	50～60	0.6	1600	22
EYCCL80-N	80	60～90	0.6	1800	25

……………………………………………………………………………………………………………………………………

print │

top │

	Chinese(BG) ----- Chinese(BIG5)	----- Website map----- Advertisement hotline



---- Your Position now：Homepage 》 Products 》EYCCL vertical sluicing discharge pressure leaf filter